Single Reversible Tapping Heads for Blackalloy™ Drill Unit Models 150 & 250

Specifically suited for automatic drill unit applications where single holes are tapped repetitively. Low-cost alternative to more expensive lead screw tapping machines; no motor reversing required.

 

  • Model 3250 (3/8-24 Threaded Mount) & Model 3500H6 (5/8-16 Threaded Mount). Both also available with 1/2-20 Threaded Mount & #33JT Mount. Consult Factory.
  • Collet Chuck with Jacobs Rubber-Flex® Collets;
    For Model 3250: #0-#8 & #10;
    For Model 3500H6: #0-1/4” & 1/4”-1/2”
  • Use With All Inch & Metric Taps; All Thread Pitches
  • Short Stroke Self-Feed -- 1/8" Float Compensates for Some Lead Error
  • Positive Drive -- Full Power of Drill Unit Transmitted to Tap
  • Automatic Reversing -- 1:1 Forward/Reverse Speed Ratio
  • Re-Entry Cushion
  • Vertical or Horizontal Operation -- Any Position or Angle
  • Accurate Depth Control
  • Factory Mounted, or Field Retrofittable


Model 3250, 3/8-24 Thd. Mount; Model 3500H6, 5/8-16 Thd. Mount

Model 3250, 3/8-24 Threaded Mount
Drill Unit
Model #

Stroke

G F

Y

Z
150-1.5 1.5 8.44 -- 5.62 4.06
150-2 2 9.44 -- 6.12 4.56
150-3 3 -- 11.44 7.12 5.56
150-4 4 -- 13.44 8.12 6.56
150-5 6 -- 17.44 10.12 8.56
150-6 8 -- 21.44 12.12 10.56
Dimensions in Inches

Model 3500H6, 5/8-16 Threaded Mount
Drill Unit
Model #

Stroke

G F

Y

Z

250-1.5 1.5 8.44 -- 5.62 4.06
250-2 2 9.44 -- 6.12 4.56
250-3 3 -- 11.44 7.12 5.56
250-4 4 -- 13.44 8.12 6.56
250-6 6 -- 17.44 10.12 8.56
250-8 8 -- 21.44 12.12 10.56
Dimensions in Inches

Tapping Head Model # Tap Capacity A

B

C D

E

Rating Steel

Chuck AA
3250 .25 .25 2.1 4 1.25 .75 3.25
3500H .31 .50 2.73 5.80 1.80 1.09 3.75
Dimensions in Inches

  back to top

Blackalloy Company of America • 1836 Lonestar Street • Unit 3 • Conway, SC 29526

Tel: (843) 347-3390 • Fax: (843) 347-3391

Website Design and Development by Industrial Web Solutions