Pneumatic Stroke/Adjustable Hydraulic Feed Control • Self-Feeding

Drill Units With Feed Controls Provide Accurate Feed Rates For Precision Applications.

This degree of accuracy is not always possible with pneumatic reciprocation alone (Models 150 & 250) where the compressibility of air allows for variations in feed rates with changes in thrust load, particularly when breaking through a hole.

  • Self-Contained Hydraulic Unit -- Does Not Require External Actuation
  • Provides Full-Stroke or Partial Feed Control -- 1-1/2", 2", 3", 4", 6" & 8"
  • Adjustable Positioning Produces Rapid Advance Which Saves Cycle Time
  • Forward Feed Control Standard -- Reverse & Double Feed Control Available
  • Skip-Feed, Stop-Feed & Multiple Feed Valve Options
  • Right And/Or Left-Side Mounts
  • Paired Mountings Reduce Spindle Center Distance To 2-1/8"
  • Minimum Feed Rate 4 In./Min.
  • Maximum Feed Rate 200 In./Min.


Model 151 & 251 Drill Units with Feed Control

Model Stroke
"A"
Model 151 Model 251 Models 151 & 251
"B" "D"

"B"

 "D" "C" "Y" "Z"
151/251-1.5 1.5 8.41 1.88 9.56 3.03 5.62 5.62 4.06
151/251-2 2 9.41 1.88 10.56 3.03 6.12 6.12 4.56
151/251-3 3 11.41 1.88 12.56 3.03 7.12 7.12 5.56
151/251-4 4 13.41 1.88 14.56 3.03 8.12 8.12 6.56
151/251-6 6 17.41 1.88 18.56 3.03 10.12 10.12 8.56
151/251-8 8 21.41 1.88 22.56 3.03 12.12 12.12 10.56
Dimensions in Inches

  back to top

Blackalloy Company of America • 4773 Northgate Blvd. • Myrtle Beach, SC 29577

Tel: (843) 347-3390 • Fax: (843)293-0851
Website Design and Development by Industrial Web Solutions